Netgear WGX102 WGX102v2 Reference Manual - Page 48
Default Factory Settings, After you install the Wireless Range Extender - factory reset
View all Netgear WGX102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102 Default Factory Settings When you first receive your WGX102, the default factory settings are shown below. You can restore these defaults with the factory default reset button on the bottom of the unit. FEATURE Wireless Access List (MAC Filtering) SSID broadcast SSID 802.11b/g RF Channel Mode Authentication Type WEP and WPA-PSK DEFAULT FACTORY SETTINGS All wireless stations allowed Enabled NETGEAR 11 g and b Automatic Disabled After you install the Wireless Range Extender, use the procedures below to customize any of the settings to better meet your networking needs. 5-6 Wireless Configuration and Security 202-10042-02 v1.1
Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
5-6
Wireless Configuration and Security
202-10042-02 v1.1
Default Factory Settings
When you first receive your WGX102, the default factory settings are shown below. You can
restore these defaults with the factory default reset button on the bottom of the unit.
After you install the Wireless Range Extender, use the procedures below to customize any of the
settings to better meet your networking needs.
FEATURE
DEFAULT FACTORY SETTINGS
Wireless Access List (MAC Filtering)
All wireless stations allowed
SSID broadcast
Enabled
SSID
NETGEAR
802.11b/g RF Channel
11
Mode
g and b
Authentication Type
Automatic
WEP and WPA-PSK
Disabled