Netgear WGX102 WGX102v2 Reference Manual - Page 62
Table 6-1., Router Status Fields
View all Netgear WGX102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102 This screen shows the following parameters: Table 6-1. Router Status Fields Field Account Name Firmware Version Internet Port MAC Address IP Address DHCP IP Subnet Mask Domain Name Server LAN Port MAC Address IP Address DHCP IP Subnet Mask Wireless Port Name (SSID) Region Channel Mode Broadcast Name Description The Host Name assigned to the WGX102. The wireless range extender firmware version. These parameters apply to the Internet (WAN) port of the WGX102. The Media Access Control (MAC) address used by the Internet (WAN) port of the WGX102. The IP address used by the Internet (WAN) port of the WGX102. If no address is shown, the wireless range extender cannot connect to the Internet. If set to None, the WGX102 is configured to use a fixed IP address on the WAN. If set to a client, such as PPPOE, the WGX102 is configured to obtain an IP address dynamically from the ISP. The IP Subnet Mask used by the Internet (WAN) port of the WGX102. The Domain Name Servers (DNS) mapping descriptive names of network resources to IP addresses. These parameters apply to the local powerline port of the WGX102. The Media Access Control address used by the local port of the WGX102. The IP address used by the local port of the WGX102. The default is 192.168.0.101 Identifies if the wireless range extender's built-in DHCP server is active for the LAN attached devices. The IP Subnet Mask used by the local port of the WGX102. The default is 255.255.255.0 These parameters apply to the wireless port of the WGX102. The wireless network name (SSID) used by the wireless port of the WGX102. The default is NETGEAR. The geographic region where the WGX102 is being used. The channel the wireless port is using. See "Wireless Channels" on page C-7 for the frequencies used on each channel. The current mode - g and b, g only, or b only. Indicates whether the WGX102 is broadcasting its SSID. 6-6 Maintenance 202-10042-02 v1.1