Pioneer AVHP7800DVD Owner's Manual - Page 108

Section 20 Audio Adjustments 3 Turn the ignition switch to ON or ACC. If the car's air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto TA and EQ. 4 Press SOURCE to turn the source off if this unit is turned on. 5 Touch the screen to display the touch panel keys. 6 Touch AV MENU and then touch AUTO EQ&TA to enter the auto TA and EQ measurement mode. 7 Touch either of the following touch panel keys to select the position for the seat on which the microphone is placed. ! FRONT LEFT - Front seat left ! FRONT RIGHT - Front seat right 8 Touch NEXT. 9 Plug the AUTO TA&EQ microphone into the microphone/auxiliary input jack on this unit. 11 Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is outputted from the speakers, and auto TA and EQ begins. # When all speakers are connected, auto TA and EQ is completed in about nine minutes. # To stop auto TA and EQ, touch STOP. # To cancel auto TA and EQ part way through, touch BACK or ESC. 12 When auto TA and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Understanding auto TA and EQ error messages on page 127.) 13 Touch ESC to cancel the auto TA and EQ mode. 14 Store the microphone carefully in the glove compartment. Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. AUTO TA&EQ microphone 10 Touch START to start the auto TA and EQ. 108 En