Pioneer AVHP7800DVD Owner's Manual - Page 61

XM tuner (GEX-P920XM) Section 13 XM tuner (GEX-P920XM) Switching the XM channel select mode You have two methods for selecting a channel: ChNumber mode and Category mode. When selecting ChNumber mode, channels in any category can be selected. Select Category mode to narrow your search down to only channels in a particular category. % Touch MODE to select the desired channel select mode. Touch MODE repeatedly to switch between the two modes. ChNumber (all channel select mode)- Category (channel category select setting) 2 Touch LIST to display the preset list. 3 Touch and hold a preset tuning key P1-P6 until the beep sounds. The selected station has been stored in memory. The next time you touch the same preset tuning key P1-P6 the station is recalled from memory. Notes ! Up to 18 stations, six for each of three XM bands can be stored in memory. ! You can also use a and b to recall stations assigned to preset tuning keys P1-P6 when the ChNumber mode is selected. Switching between the detail information display and preset list display You can switch the left side of the basic screen according to your preference. % Touch LIST. Touch LIST repeatedly to switch between the followings: Detail information display-Preset list display -OFF Storing and recalling broadcast stations If you touch any of the preset tuning keys P1-P6 you can easily store up to six broadcast stations for later recall with the touch of a key. 1 Select the channel that you want to store in memory. Selecting a channel Selecting a channel in the channel category 1 Touch MODE to select the channel category select mode. Category appears on the information bar. 2 Touch a or b to select the desired channel category. 3 Touch c or d to select the desired channel in the selected channel category. Selecting a channel from the XM channel list display The list content can be switched so you can search for the track you want to listen to not only by the channel name but also by the artist name or song title. En 61