Pioneer AVHP7800DVD Owner's Manual - Page 96

Section 20 Audio Adjustments Switching the sound settings You can switch the acoustic sound field stored in this unit according to the source you are listening to. For detailed instructions on creating the acoustic sound field, refer to Introduction of sound settings on the next page. % Touch SOUND SETTING on the audio function menu to switch the sound setting. Touch SOUND SETTING repeatedly to switch between the following settings: SETTING1 (user setting 1)-SETTING2 (user setting 2)-SETTING3 (user setting 3)-AUTO (setting created by auto TA & EQ) # You can also switch the sound setting by pressing SOUND SETTING. # You cannot select AUTO when NETWORK has been selected. (Refer to Switching the DSP setting mode on page 117.) # When STANDARD has been selected, you cannot select AUTO if Auto TA and EQ has not been carried out. % Touch 2CH/Multi CH on the audio function menu to switch the mode. Touch 2CH/Multi CH repeatedly until the desired mode appears in the display. ! MCH - Multi-channel audio output ! 2CH - 2-channel audio output (stereo) # You can also switch the output setting by pressing 2ch/MULTI-CH. Switching between the multi-channel output and 2-channel output You can switch the output channel between the multi-channel output and 2-channel output according to the source you are listening to. ! Selecting 2CH changes the audio settings as below: - Both the front center and rear center speakers are turned off automatically in the speaker setting. (Refer to page 101.) - Both Dolby Pro Logic II/Dolby Digital EX and DTS Neo:6 switch to OFF. (Refer to page 94.) 96 En