Pioneer AVHP7800DVD Owner's Manual - Page 116
Adjusting initial settings, Switching the warning tone, Switching the auxiliary setting, Correcting
UPC - 012562799179
View all Pioneer AVHP7800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Section 23 Initial Settings Adjusting initial settings 1 Switching the warning tone If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone. % Touch DETACH WARNING on the initial menu to turn warning tone on. # To turn warning tone off, touch DETACH WARNING again. Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. 1 Function display Shows the function names. 1 Touch the source icon and then touch OFF to turn this unit off. 2 Touch the screen to display the touch panel keys. 3 Touch AV MENU to display the function names. The function names are displayed and operable ones are highlighted. 4 Touch ESC to return to the display of each source. # To return to the previous display, touch BACK. Note You can use AUTO EQ&TA (auto-time alignment and auto-equalizing), only when STANDARD has been selected in DSP MODE. (Refer to Switching the DSP setting mode on the next page.) Switching the auxiliary setting Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 122. % Touch AUX1/AUX2 on the initial menu to turn each auxiliary setting on. # To turn auxiliary setting off, touch AUX1/ AUX2 again. Correcting distorted sound You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause distortion. If high sound is crippled or distorted, try switching to LOW. Normally, leave the setting at HIGH to ensure quality sound. % Touch DIGITAL ATT on the initial menu to switch the digital attenuator setting. Touch DIGITAL ATT repeatedly until the desired setting appears in the display. ! HIGH - High quality sound ! LOW - Minimize distortion sound 116 En