Pioneer AVHP7800DVD Owner's Manual - Page 93
Adjusting source levels, Using the direct control, Audio Adjustments
UPC - 012562799179
View all Pioneer AVHP7800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Audio Adjustments Section 20 Audio Adjustments 2 Touch or to adjust front/rear speaker balance. Each time you touch or it moves the front/rear speaker balance towards the front or the rear. FRONT 25 to REAR 25 is displayed as the front/rear speaker balance moves from front to rear. 3 Touch or to adjust left/right speaker balance. Each time you touch or it moves the left/ right speaker balance towards the left or the right. LEFT 25 to RIGHT 25 is displayed as the left/ right speaker balance moves from left to right. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Touch SOURCE LEVEL ADJUSTER on the audio function menu. 3 Touch or to adjust the source volume. Each time you touch or it increases or decreases the source volume. +14dB to -14dB is displayed as the source volume is increased or decreased. Notes ! Video CD, CD, compressed audio (MP3/WMA/ AAC) and DivX are set to the same source level adjustment volume automatically. ! DVD and the optional DVD player are set to the same source level adjustment volume automatically. ! XM tuner and SIRIUS tuner are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. Using the direct control You can override audio settings to check for effectiveness of your audio settings. ! All audio functions are locked out when the direct control is on except VOLUME, Dolby PL II/EX and DTS Neo:6. % Touch Digital Direct on the audio function menu to turn the direct control on. # To turn direct control off, touch Digital Direct again. Note When selecting 2-channel mode, the following occurs: ! If Digital Direct is turned on, output setting is switched to MCH automatically. If Digital Direct is turned off, output setting is returned to 2CH automatically. En 93