Samsung CLP-510 User Manual (ENGLISH) - Page 229

Setting Up a Network-Connected Printer You have to set up the network protocols on the printer to use it as your network printer. Setting protocols can be accomplished by using the supplied network program. Please refer to SyncThru User's Guide. You can configure the basic network parameters through the printer's control panel. Use the printer control panel to do the following: • Enable or disable network protocols (IPX/SPX) • Configure TCP/IP • Configure IPX frame types Configuring Network Parameters on the Control Panel Supported Operating Systems NOTE: The operating systems supported by the network card may be different than the operating systems supported by the printer. The following table shows the network environments supported by the printer. Item Network Interface Requirements 10/100 Base-TX (standard for CLP-510N) or 802.11b Wireless LAN Network Operating System • Novell NetWare 4.x, 5.x, 6.x • Windows 95/98/Me/NT 4.0/2000/2003/XP • Various Linux OS • Macintosh OS 10.3.x Network Protocols • Netware IPX/SPX • TCP/IP, DLC/LLC on Windows Dynamic Addressing Server DHCP, BOOTP • IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange • TCP/IP: Transmission Control Protocol/Internet Protocol • DLC/LLC: Data Link Control/Logical Link Control • DHCP: Dynamic Host Configuration Protocol • BOOTP: Bootstrap Protocol C.6 USING YOUR PRINTER ON A NETWORK