Samsung CLP-510 User Manual (ENGLISH) - Page 83
Printing on Labels, with the print, side down
UPC - 635753700404
View all Samsung CLP-510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Printing on Labels • Only use labels recommended for laser printers. • Verify that the labels' adhesive material can tolerate a fusing temperature of 180°C (356°F) for 0.1 seconds. • Make sure that there is no exposed adhesive material between the labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to printer components. • Never print on the same sheet of labels more than once, or print on a partial sheet of labels. • Do not use labels that are separating from the backing sheet or are wrinkled or damaged in any way. • To prevent labels from sticking together, do not let the printed label sheets stack up as they are printed out. To print on labels: 1 Open the Multi-purpose Tray and unfold the paper support. 2 Load labels in the Multi-purpose Tray only, with the print side down and the top, short edge in first. Adjust the guide to fit the width of the labels. 3.16 USING PRINT MATERIALS