Samsung CLP-510 User Manual (ENGLISH) - Page 230
Printing a Network Configuration Setting Network Protocols, Enter, Upper Level, On Line/Continue
UPC - 635753700404
View all Samsung CLP-510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Printing a Network Configuration Page The Network Configuration page shows how the network interface card on your printer is configured. The default settings which are suitable for most applications are enabled. 1 In ready mode, press the Menu button ( ) until you see "Network" on the bottom line of the display. 2 Press the Enter button ( ) to access the menu. 3 Press the scroll button ( or ) until "Print Net CFG" displays on the bottom line. 4 Press the Enter button ( ). The Network Configuration page prints out. Setting Network Protocols When you first install the printer, all supported network protocols are enabled. If a network protocol is enabled, the printer may actively transmit on the network even when the protocol is not in use. This may increase network traffic slightly. To eliminate unnecessary traffic, you can disable unused protocols. 1 In ready mode, press the Menu button ( ) until you see "Network" on the bottom line of the display. Press the Enter button ( ) to access the menu. 2 Press the Enter button ( ) when "Config Network" displays on the bottom line. 3 Press the scroll button ( press the Enter button ( button ( ). or ) until "Yes" displays, and ). Then press the Upper Level 4 Press the scroll button ( or ) until you see the desired protocol on the bottom line. You can choose between "Config TCP" and "Netware". 5 Press the Enter button ( ). C 6 Press the scroll button ( or ) to change the setting. If you selected "Config TCP", change the setting to "No" (disable) or "Yes" (enable). If you selected 'Netware', change the setting to "Off" (disable) or "On" (enable). 7 Press the Enter button ( ) to save the selection. 8 Press the On Line/Continue button ( ) to return to ready mode. USING YOUR PRINTER ON A NETWORK C.7