Samsung CLX 3175FN User Manual (ENGLISH) - Page 135

5. Press the left/right arrow until Local PC appears on the bottom line of the display and press OK. If the machine connected to a network, select Network PC and press OK. If you see Not Available message, check the port connection. If you selected Network PC, select your registered user ID and enter the PIN. Press OK. • ID is the same ID as the registered ID for Samsung Scan Manager. • PIN is the 4 digit number registered for Samsung Scan Manager. 6. From Scan Destination, press the left/right arrow until the application program you want appears, then press OK. Default setting is My Documents. To add or delete the folder where the scanned file is saved, add or delete the application program in Samsung Scan Manager>Set Scan Button. 7. Press the left/right button until the setting you want appears then press OK. • Resolution: Sets the image resolution. • Scan Color: Sets the color mode. • Scan Format: Sets the file format in which the image is to be saved. • Scan Size: Sets the image size. • Scan Format appears only when you selected the Scan Destination to My Documents. • If you want to scan from the default setting, press Color Start or Black Start. 8. Scanning begins. • Scanned image is saved in computer's My Documents> My Pictures>Samsung folder. • You can use Twain driver to scan quickly in Samsung Scan Manager program. • You can also scan by pressing Window's Start>Control Panel> Samsung Scan Manager>Quick Scan. CHANGING THE SETTINGS FOR SCAN JOB Your machine provides you with the following setting options to allow you to customize your scan jobs. • Scan Size: Sets the image size. • Original Type: Sets the original document's type. • Resolution: Sets the image resolution. • Scan Color: Sets the color mode. • Scan Format: Sets the file format in which the image is to be saved. If you select TIFF or PDF, you can select to scan multiple pages. Depending on the selected scan type, this option may not appear. To customize the settings before starting a scan job: 1. Press Menu. 2. Press the left/right arrow until Scan Menu appears and press OK. 3. Press OK when Scan Feature appears. 4. Press OK when USB Feature appears. 5. Press the left/right arrow until the scan setting option you want appears and press OK. 6. Press the left/right arrow until the desired status appears and press OK. 7. Repeat steps 5 and 6 to set other setting options. 8. When you have finished, press Stop/Clear to return to ready mode. CHANGING THE DEFAULT SCAN SETTINGS To avoid having to customize the scan settings for each job, you can set up default scan settings. 1. Press Menu. 2. Press the left/right arrow until Scan Menu appears and press OK. 3. Press the left/right arrow until Scan Setup appears and press OK. 4. Press OK when Change Default appears. 5. Press OK when USB Default appears. 6. Press the left/right arrow until the scan setting option you want appears and press OK. 7. Press the left/right arrow until the desired status appears and press OK. 8. Repeat steps 6 and 7 to change other settings. 9. Press Stop/Clear to return to ready mode. Scanning_ 38