Sony BDP-CX7000ES Operating Instructions - Page 62

Changing the Command Mode When you have more than one Sony Blu-ray disc/DVD player, the supplied remote may interfere with another player. In this case, change the command mode for this player and the supplied remote to one that differs from the other player. The default command mode for this player and the supplied remote is BD1. Number buttons THEATER INPUT AV OPEN/CLOSE OPERATION CHANGE AMP TV BD 1 2 3 123 4 5 6 456 7 8 9 789 CLEAR 0 ENTER 0 ENTER FAVORITES CC WIDE AUDIO SUBTITLE ANGLE TIME REPEAT SHUFFLE ALL DISCS DISPLAY RED GREEN BLUE YELLOW IDEMENU POP GUI UP BD ENTER POP UP/ MENU B/V/v/b/ To switch the command mode for the remote Set the command mode for the remote so it matches the command mode you set in step 6 above (for the player). 1 Press POP UP/MENU while pressing down BD. 2 While BD is flashing, enter the 3-digit code number using the number buttons, then press ENTER. Command mode Code number BD1 310 BD2 311 BD3 312 z If the command mode for the player does not match the remote, the command mode for the player appears on the front panel display when you try to operate the remote. TOP GU TOOPOTLISONS MOD/MEENU RETURN HOME HOME SORT GROUP PREV REPLAY ADVANCE NEXT PLAY SCENE SEARCH PAUSE STOP To switch the command mode for the player 1 Press HOME to display the home menu. 2 Select (Setup) using B/b. 3 Select "System Settings" using V/v, and press . 4 Select "Command Mode," and press . 5 Select a command mode (BD1, BD2, or BD3), and press . The display asks for confirmation. 6 Select "Yes," and press . The command mode for the player is changed to the one you set in step 5. 62US