Sony BDP-CX7000ES Operating Instructions - Page 69

Settings and Adjustments Audio Settings The default settings are underlined. Audio Output Priority Selects the jack type to output audio signals. 2-channel linear PCM signals are output at 48 kHz maximum from output jacks other than the priority jacks. HDMI Outputs audio signals from the HDMI OUT jack. Coaxial/ Optical Outputs audio signals from the DIGITAL OUT (OPTICAL/COAXIAL) jack. Multi Channel Analog Select this when connecting an AV amplifier (receiver) via the MULTI CHANNEL OUTPUT jacks. Stereo Analog Outputs audio signals from the AUDIO OUT (L/R) jacks. Speaker Settings To obtain the best possible surround sound, set for the type of speakers you are using, and their distance from your listening position, then use the test tone to adjust the volume and the balance of the speakers. This setting is available when "Audio Output Priority" is set to "Multi Channel Analog." To set the speakers 1 Select "Speaker Settings" in "Audio Settings," and press . 4 Select and adjust settings using V/v, and then pressing . ◆Size Selects the size of the speakers. • Front Large Normally select this position. Small Select this when the speakers cannot reproduce adequate low frequencies. • Center Large Small None Normally select this position. Select this when the speaker cannot reproduce adequate low frequencies. Select this if you do not connect a center speaker. • Surround Large Small None Normally select this position. Select this when the speakers cannot reproduce adequate low frequencies. Select this if you do not connect surround speakers. • Surround Back Large Normally select this position. Small Select this when the speakers cannot reproduce adequate low frequencies. None Select this if you do not connect surround back speakers. 2 Select "Size," "Distance," and press . 3 Select a setup item using V/v, and press . ,continued 69US