Sony HDR-GW77V Operating Instructions - Page 10
Notes before using the camcorder, under/near water, Notes on using the camcorder under, near water
View all Sony HDR-GW77V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Notes before using the camcorder under/near water Make sure that no foreign matter such as sand, hair, or dirt gets inside the battery/memory card/jack cover. Even a small amount of foreign matter may lead to water entering the camcorder. Confirm that the sealing gasket and its mating surfaces have not become scratched. Even a small scratch may lead to water entering the camcorder. If the sealing gasket or its mating surfaces become scratched, take the camcorder to an authorized repair shop to have the sealing gasket replaced for a fee. Sealing gasket The sealing surfaces of the sealing gasket If dirt or sand gets on the sealing gasket or its mating surfaces, wipe the area clean with a soft cloth that will not leave behind any fibers. Prevent the sealing gasket from becoming scratched by touching it while charging a battery or using a cable. Do not open/close the battery/memory card/jack cover with wet or sandy hands or near water. There is a risk this will lead to sand or water getting inside. Before opening the cover, perform the procedure described in "Cleaning after using the camcorder under/near water". Open the battery/memory card/jack cover with the camcorder completely dry. Always confirm that the battery/memory card/ jack cover has been securely locked. Notes on using the camcorder under/ near water The touch panel may be activated by water splashes on the screen icons. The touch panel cannot be operated underwater. Use the buttons of the camcorder to perform shooting operations. Do not subject the camcorder to shock such as from jumping into water. Do not open and close the battery/memory card/jack cover while under/near water. This camcorder sinks in water. Place your hand through the wrist strap to prevent the camcorder from sinking. Faint, white, circular spots may appear in under-water flash photos due to reflections off of floating objects. This is not a malfunction. Select (Underwater) in Scene Selection to shoot underwater with less distortion (p. 47). If water drops or other foreign matter is present on the lens, you will not be able to record clear images. Cleaning after using the camcorder under/near water Always clean the camcorder with water after use within 60 minutes, and do not open the battery/ memory card/jack cover before cleaning is finished. Sand or water may get inside places where it cannot be seen. If not rinsed, waterproof performance will be degraded. Allow the camcorder to sit in pure water poured into a cleaning bowl for about 5 minutes. Then, gently shake the camcorder, press each button inside the water to clean away any salt, sand or other matter lodged around the buttons. US 10