Sony HDR-GW77V Operating Instructions - Page 20
Charging time, To remove the battery pack, On the power supply, Charging with AC Adaptor: 140 min - b 500
View all Sony HDR-GW77V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. Charging with AC Adaptor: 140 min Charging with your computer: 200 min The charging times shown above are measured when charging the camcorder at a temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F). To remove the battery pack 1 Close the LCD screen, then slide back and open the battery/memory card/jack cover while sliding and holding the cover lock lever. 2 Slide the battery release lever () and remove the battery pack (). Make sure that the battery does not fall out. On the power supply You can connect the USB cable to an AC Adaptor that is connected to a wall outlet (wall socket) so that the power can be supplied to the camcorder. You can also connect your camcorder to a computer using the USB cable, so that the power will be supplied from the computer, then you do not have to worry about the amount of power remaining in the battery while copying images from the camcorder, etc. Insert the battery into the camcorder before connecting it to a power supply either by connecting the camcorder to the AC Adaptor or the computer. The recording mode can be selected only when the camcorder is connected to the AC Adaptor or a computer which is compatible with a 1,500 mA standard power supply. When you connect the camcorder to a computer using the USB cable during playback, the USB connection screen appears. It will turn to the Playback screen if you press (View Images). US 20