Sony HDR-GW77V Operating Instructions - Page 18
Connect the AC Adaptor, wall socket.
View all Sony HDR-GW77V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4 Connect the AC Adaptor (), the power cord (mains lead) () and the USB cable () to your camcorder and the wall outlet (wall socket). The CHG (charge) lamp turns on. The CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the USB cable from the USB jack of your camcorder. CHG (charge) lamp USB plug (small) 5 Close the battery/memory card/ jack cover. Flip the battery/memory card/jack cover back (), then slide () and close the cover firmly until the yellow mark of the cover lock lever is hidden. USB plug (big) To the wall outlet (wall socket) Notes You cannot insert any battery pack other than an NP‑BG1 (supplied) or an NP‑FG1 (sold separately) into your camcorder. You cannot use a Sony CP‑AH2R, CP‑AL, or AC‑UP100 portable power supply device (sold separately) to charge the camcorder. In the default setting, the LCD screen turns dark if you do not operate the camcorder for about 1 minute, and the power turns off if you do not operate the camcorder for 2 minutes, to save battery power ([Power Save] p. 49). US 18