Sony HDR-GW77V Operating Instructions - Page 51
Self-diagnosis display/Warning indicators
View all Sony HDR-GW77V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
unnecessary images (p. 38). Total number of movie scenes or photos exceeds the recordable capacity of your camcorder (p. 52). Delete unnecessary images (p. 38). The camcorder stops operating. The camcorder may stop recording if the camcorder is subject to continuous vibration. "PlayMemories Home" cannot be installed. Check the computer environment or installation procedure required to install "PlayMemories Home." "PlayMemories Home" does not work correctly. Quit "PlayMemories Home" and restart your computer. The camcorder is not recognized by the computer. Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the USB cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in the correct order. Self-diagnosis display/Warning indicators If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. In this case, when you contact them, give them all the numbers of the error code beginning with C or E. You may hear a melody when some warning indicators appear on the screen. C:06: The battery pack temperature is high. Change the battery pack or place it in a cool place. C:13: / C:32: Remove the power source. Reconnect it and operate your camcorder again. E Follow the steps from on page 50. The battery pack is nearly used up. Others/Index The battery pack temperature is high. Change the battery pack or place it in a cool place. No memory card is inserted (p. 24). When the indicator flashes, there are not enough free spaces for recording images. US 51