Sony HDWD1800 Operation Manual - Page 40
DMC Dynamic Motion Control Playback
View all Sony HDWD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 4 Recording and Playback The range of speed adjustment is ±15% in steps of 1%. The SERVO indicator goes off. 2 When the adjustment is completed, release the PLAY button. The tape transport returns to normal speed, and the SERVO indicator comes on again. To carry out continuous capstan override playback 2,3 3,4 1 Set "TSO PLAY" in setup menu item 111 to "TSO". 2 With F4 (DMC) selected in function menu page P06: EDIT, turn the MULTI CONTROL knob to select the playback speed. The selected playback speed is displayed in ancillary message display on the lower control panel of this unit as well as in the text information display section on the video monitor. 3 With F4 (DMC) selected, press the PLAY button. 4 Press the PLAY button or carry out any other operation to exit the tape speed override mode. For details of setup menu operations, see Section "9-2 Setup Menu Operations" (page 75). For details of character information displayed on the video monitor screen, see the descriptions of F5 (CHARA) in function menu page P04: MISC-1 (page 68) and setup menu item 005 (page 78). 4-2-3 DMC (Dynamic Motion Control) Playback Overview DMC playback allows you to vary the playback speed for a certain section of a tape, in variable speed mode (from -1 to +2 times normal speed) and store the varying speed in memory for later playback. For example, during a live broadcast of a sporting event you can set the start and end points of highlights while recording, and then provide immediate DMC playback of those highlights. During DMC playback the tape runs as shown in the following figure. On-air start point Preroll point Speed variation start point Waiting for the on-air cue before starting DMC Stop playback Setting F3 (REVIEW) in P06: EDIT again at the onair cue. Select F3 (REVIEW). Normal speed playback DMC playback Speed variation end point On-air end point Normal speed playback Stop Starting DMC playback immediately after preroll Select F2 (PREVIEW). Normal speed playback DMC playback Normal speed playback 40 4-2 Playback