Sony HDWD1800 Operation Manual - Page 88
Item number, Item name, Settings, 5S to 8M, to 30M, STDBY, T.REL, STDBY, NORML, LOOSE
View all Sony HDWD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 9 Setup Menus Menu items in the range 400 to 499, relating to preroll (Continued) Item number Item name 403 AUTOMATIC PREROLL REFERENCE ENTRY 405 CUEUP BY CTL Settings Select whether the IN point is automatically set by pressing the PREROLL button, when the IN point is not set on starting preroll. DIS: Do not set IN point automatically. ENA: Set IN point automatically. Select the tape transport mode when cuing. This setting is valid only when CTL/TC is set to "CTL". CAP.: During cueup, the tape runs with "pinch ON" (maximum tape speed 10 times normal). REEL: During cueup, the tape runs with "pinch OFF". As the tape approaches the cue up point and the tape speed drops, the tape transport switches to the "pinch ON" state.a) To give priority to editing accuracy, select "CAP.". a) When controlled from an editor (BVE-2000/9100 etc.), selecting "REEL" allows high-speed cueup. Menu items in the range 500 to 599, relating to tape protection Item number Item name 501 STILL TIMER 502 TAPE PROTECTION MODE FROM SEARCH 503 TAPE PROTECTION MODE FROM STOP 504 DRUM ROTATION IN STANDBY OFF 505 STILL TENSION Settings Select the time delay from when the tape stops (either the "stop mode" or the still playback mode in search mode) until the unit automatically switches to the tape protection mode, in order to protect the video heads and tape. 0.5S to 8M to 30M: Set the value in the range 0.5 seconds to 30 minutes. Select the protection mode to protect the video heads and tape when in the still playback mode in search mode (jog/shuttle). STEP: Step forward at 1/30 times normal speed every 2 seconds. STDBY: Switch to Standby OFF mode (the unit not on standby). T.REL: Switch to tension release mode (the tape tension slackened). Select the operation of the protection mode to protect the video heads and tape when stopped (the "stop mode"). STDBY: Switch to Standby OFF mode (the unit not on standby). T.REL: Switch to tension release mode (the tape tension slackened). STEP: Step forward at 1/30 times normal speed every 2 seconds. Select whether the drum rotates in Standby OFF mode. OFF: Drum does not rotate. ON: Drum rotates. Select the tape tension state in the still playback mode. NORML: Normal tape tension is maintained during still playback mode, ready for playback. LOOSE: Reduce the tape tension further from the NORML setting. (Select "LOOSE" when the unit is on standby for a long period of still playback, for example, in a library management system (LMS).) Note When "LOOSE" is selected and the tape tension is reduced, playback cannot be guaranteed. 88 9-4 Items in the Extended Setup Menu