Sony HDWD1800 Operation Manual - Page 85
F/2F, ACCUR, ROUGH, STILL, NEG&E, AUTO1, AUTO2, Item number, Item name, Settings
View all Sony HDWD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 9 Setup Menus Menu items in the range 300 to 399, relating to editing operations (Continued) Item number Item name 304 EDIT FIELD SELECT Settings Select with which fields to start and end editing. 1F: Start editing with field 1 and end with field 2. 2F: Start editing with field 2 and end with field 1. 1F/2F: Start and end editing depending on the timing of command reception. Note 1F is always selected in PsF mode. 305 SYNC GRADE Select the target phase synchronization accuracy when editing in phasesynchronized mode with menu item 004 set to "ON". ACCUR: ±0 frame accuracy ROUGH: ±1 frame accuracy 306 DMC INITIAL SPEED Select the initial speed automatically set in DMC editing. MANU: The speed determined by the rotation of the search dial PLAY: Normal playback speed STILL: Stationary ±0.03 to ±1, +2: Speed set in this range (select from +2, ±1, ±0.5, ±0.2, ±0.1, ±0.03) 307 AUTO-DELETION FOR Select the operation of this unit when an erroneous edit point is set. INCONSISTENT DATA MANU: A warning is given by flashing the name of the edit point button for the erroneous edit point in the lower control panel. Delete or correct the erroneous edit point manually. NEG&E: When edit points are set incorrectly, such as when an OUT point is before an IN point, or an audio OUT point is before an audio IN point, or when too many edit points are specified, the previously set edit point is deleted automaically. NEG: When edit points are set incorrectly, such as when an OUT point is before an IN point, or an audio OUT point is before an audio IN point, the previously set edit point is deleted automaically. When too many edit points are specified, a warning is given by flashing the name of the edit point button for the unnecessary edit point in the control panel. Note Pressing the button corresponding to an edit point to be deleted and the DELETE button simultaneously deletes the edit point. Editing is not executed if an erroneous edit point is set (the name of an edit button is flashing). 309 SERVO/AV REFERENCE Select the servo reference signal. SEL AUTO1: During recording, the input video signal is used as the servo reference signal. During playback, the signal selected by F2 (REF VID) in function menu page P03: VID PROC is used as the servo reference signal. If the signal selected by the F2 (REF VID) in function menu page P03: VID PROC is not connected, an internal reference signal is used. AUTO2: When F2 (REF VID) in function menu page P03: VID PROC is set to "REF", and any of F2 (INS TC), F3 (INS CUE), and F5 (ASSEMBLE) to F10 (INS A4) in function menu page P07: E.PRESET is lit, the reference signal for video/audio signal processing is locked to the input video signal. EXT: The servo reference signal is forced to be "EXT" (an external reference video input signal is used). 85 9-4 Items in the Extended Setup Menu