Sony HDWD1800 Operation Manual - Page 96
% 0H to 100% 800H
View all Sony HDWD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 9 Setup Menus Menu items in the range 700 to 799, relating to video control (continued) Item number Item name 743 PR LEVEL (HD) 745 SETUP LEVEL (HD) 746 SYNC PHASE (HD) 747 SYNC PHASE FINE (HD) Settings Adjust the PR level of the high-definition video signal output from the HDSDI OUTPUT connector. 0.0% (0H) to 100% (800H) to 141.3% (B4EH) Adjust the setup level of the high-definition video signal output from the HDSDI OUTPUT connector. 0 to 110H to 220H Control the H sync phase of the high-definition video signal output from the HDSDI OUTPUT connector according to the menu. 0 to 80H to FFH Fine control the H sync phase of the high-definition video signal output from the HDSDI OUTPUT connector according to the menu. 0 to 3FFH Menu items in the range 800 to 899, relating to audio control Item number Item name Settings 801 DIGITAL JOG SOUND Turns the digital jog sound on and off. OFF: Digital jog sound is turned off. Audio of digital channels not subjected to speed correction is output. When the tape stops, after one second the audio is muted. ON: Digital jog sound is turned on. When the tape speed is in the range x-1 to x+1, speed correction is carried out, and the same jog sound as a conventional analog VTR is output. 802 DIGITAL AUD MUTING IN Set the digital audio muting conditions during shuttle playback. SHUTTLE MODE OFF: Not muted. CUEUP: Muted during cueup or preroll operations. FULL: Muted in shuttle mode. 803 DIGITAL AUDIO FADE Specify the time for cross-fade or fade in/out editing of digital audio signals. TIME 5ms, 10ms, 15ms, 20ms, 25msa), 50msb), 85ms, 115msc) Note The cross-fade or fade in/out operation means that the recording is rewritten from the OUT point for the length specified by this setting. Even at the minimum 5ms setting, a length of recording corresponding to a field is rewritten. To avoid rewriting, set menu item 317 "AUDIO EDIT MODE" to "CUT". In this case there is an audio discontinuity at the edit point. There is no effect on the recorded video signal. 805 AUDIO MONITOR Select the audio mixing method used for digital audio signals supplied to the OUTPUT MIXING MONITOR OUTPUT connector. ADD: Simple addition RMS: Root-mean-square AVE: Simple average 806 LEVEL METER SCALE Select the digital audio level display mode. PEAK0: Display the audio level as negative values with the maximum level set to "0 dB". REF.0: Display the audio level as positive and negative values with the reference level set to "0 dB". 807 AUDIO OUTPUT PHASE Select the output timing of digital audio playback signals (HDSDI, SDI and AES/ EBU only). The reference position is 80H; when the setting is less than 80H, the output timing is advanced, and when it is higher than 80H, the output timing is delayed. (at 80H, 128 samples = approx. 2.7 ms, and 1 sample = approx. 20 µs) 0 to 80 to FF: Set in this range. 96 9-4 Items in the Extended Setup Menu