Sony HDWD1800 Operation Manual - Page 97
INS CUE, and F5 ASSEMBLE to F10 INS A4 in function menu P07
View all Sony HDWD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 9 Setup Menus Menu items in the range 800 to 899, relating to audio control (Continued) Item number Item name 808 INTERNAL AUDIO SIGNAL GENERATOR 810 AUDIO EDIT PREVIEW SWITCHER 823 NON-AUDIO FLAG PB (HDW-D1800 only) Sub-item 1 CH1/CH2 Settings Select the operation of the internal audio test signal generator. OFF: No operation SILNC: Silent signal 1KHZ: At 1 kHz, -20 dB FS sine wave is supplied to all audio input channels. To output the internal audio test signal, display function menu page P08: AUD INP, hold down the ALT/DELETE button, then select F6 (AUDIO SG). To cancel the signal output, hold down the ALT/DELETE button and select F6 (AUDIO SG). Note When the system frequency is 24PsF or 23.98PsF, the frequency of the internal audio test signal is reduced 4% of the normal frequency. Set the output phase for the audio playback signal when any of F2 (INS TC), F3 (INS CUE), and F5 (ASSEMBLE) to F10 (INS A4) in function menu page P07: E.PRESET is lit. INT: The audio playback signal output phase is the same as the output phase in the E-E mode. Select this setting when editing with a single VTR, or when previewing while monitoring the VTR output signal. EXT: The audio playback signal output phase is the same as the phase of an input video signal or external reference video signal. Controls the non-audio flag when the playback format is Digital Betacam. During playback (except E-E mode), set the digital audio non-audio flag as follows. OFF: OFF (the data is audio) ON: ON (the data is non-audio) AUTO: As follows • Tape data has been read and confirmed: "ON" or "OFF", according to the data. • Tape data has not been confirmed: Current state is maintained. 2 CH3/CH4 Note In the HDCAM format, the non-audio flag follows the setting of maintenance menu item M372 during recording and E-E mode. For more information about the maintenance menu item M372, refer to the Maintenance Manual. 824 ANALOG LINE OUTPUT Select the analog audio signals (tracks 1 to 8) to be assigned to audio output SELECT channels 1 and 2. tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2. tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2. tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2 (HDW-D1800 only). tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2 (HDW-D1800 only). 825 AUDIO ADVANCE MODE Set the audio output phase. OFF: Same as the video output phase ON: One frame ahead of the video output phase 97 9-4 Items in the Extended Setup Menu