Sony HDWD1800 Operation Manual - Page 81
Items in the Extended Setup Menu
View all Sony HDWD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 9 Setup Menus 9-4 Items in the Extended Setup Menu The extended setup menu contains the following items. In the "Settings" column of the table, the factory default settings are underlined. Menu items in the range 100 to 199, relating to the control panels Item number Item name 101 SELECTION FOR SEARCH DIAL ENABLE 102 MAXIMUM TAPE SPEED 104 AUDIO MUTING TIME 105 REFERENCE SYSTEM ALARM 106 CAPSTAN LOCK (Invalid in 24PsF or 23.98PsF mode) Settings Select how the unit enters the search mode. DIAL: Turning the search dial switches to search mode at all times except during recording/editing. KEY: Pressing one of the JOG, SHUTTLE, and VAR buttons switches to search mode. Select the fast forward and rewind speed and also search mode speed during tape playback. MAX: Carry out fast forward, rewind, and search at the maximum speeds. MX/24: Carry out fast forward and rewind at the maximum speeds, and search at up to 24 times normal speed. MX/35: Carry out fast forward and rewind at the maximum speeds, and search at up to 35 times normal speed. x24: Carry out fast forward and rewind at 24 times normal speed, and search at up to 24 times normal speed. x35: Carry out fast forward and rewind at 35 times normal speed, and search at up to 35 times normal speed. Maximum fast forward and rewind speed (example in 59.94i or 29.97PsF mode) • HDCAM cassette/Digital Betacam cassette: 50 times normal speed • MPEG IMX cassette: 78 times normal speed Maximum search mode speeds (example in 59.94i or 29.97PsF mode) • HDCAM cassette/Digital Betacam cassette: 50 times normal speed • MPEG IMX cassette: 78 times normal speed Select the length of time for audio muting when the unit switches to playback from stop or from still playback in the search mode. OFF: Set the audio muting time to zero (i.e. no muting). 0.1S to 1.0S: Set the audio muting time from 0.1 to 1.0 second, in 0.1-second increments. Select whether to display a warning when the video/audio reference signal selected by OUTREF in function menu is not supplied or is out of phase with the input video signal. OFF: No warning. ON: Flash the STOP button as a warning. Select the capstan servo lock mode. PANEL: The capstan servo lock mode is determined by CAPSTN in function menu. 2F: The capstan servo locks every two fields regardless of the setting of CAPSTN in function menu. 4F: The capstan servo locks every four fields regardless of CAPSTN in function menu. 8F (In 50i, 25PsF mode only): The capstan servo locks every eight fields regardless of the setting of CAPSTN in function menu. Note When operating in 24PsF or 23.98PsF mode, 2F is selected automatically and this item is not displayed. 81 9-4 Items in the Extended Setup Menu