Sony HT-8800DP Operating Instructions (RDR-GX300 DVD Recorder) - Page 46

Changing the priority of overlapped settings If the timer settings overlap, the program that was set last has priority and will be recorded. A timer recording of lower priority may be canceled, start from the middle or stop midway through the program. You can change the priority of a program if necessary. When the timer settings overlap The program set last has priority. Example: You set the timer in order of A, B, and C (setting C has first priority) 7:00 A will be cut off 9:00 B 11:00 1 Press SYSTEM MENU. The System Menu appears. 2 Select "TIMER LIST," and press ENTER. TIMER LIST 10:30 PM Mon 10/25 8:30PM - 9:30PM 4ch HQ Mon-Sat 10:00AM - 10:30AM 25ch SP Fri 10/29 9:00AM - 10:15AM 3ch SLP Sat 10/30 4:00PM - 5:00PM 125ch SLP 3 Select an overlapped timer setting, and press ENTER. indicates that the timer setting is overlapped by another timer setting. 4 Select "Check Overlap," and press ENTER. Check Overlap These timer settings overlap. Mon-Sat 10:00AM - 10:30AM 25ch SP Fri 10/29 9:00AM - 10:15AM 3ch SLP 10:30 C Actual recording A B C 7:00 9:00 10:30 If you give setting B priority over setting C, all of program B will be recorded and program C is recorded only after program B has ended. A B C 7:00 9:00 11:00 If the end time of one recording and the start time of another are the same The end of program A will be cut. 7:00 A 9:00 10:00 B Change Close 5 Select "Change," and press ENTER. Change priority Fri 10/29 9:00AM - 10:15AM 3ch SLP Where do you want to move this timer setting? Mon-Sat 10:00AM - 10:30AM 25ch SP Cancel 6 Press M/m to change the timer setting's priority, and press ENTER. The setting moves to its new location in the list. A timer setting higher up in the list has higher priority. To return to the Timer List, select "Cancel." z Hint You can change the priority of a timer setting while recording. 46