Sony HT-8800DP Operating Instructions (RDR-GX300 DVD Recorder) - Page 86

Self-diagnosis Function (When letters/numbers appear in the display)

Page 86 highlights

"RECOVERY" appears in the front panel display. , The recorder's recovery function was activated when the recorder was turned on because the power was turned off or failed during recording. Leave the recorder on until "RECOVERY" disappears from the front panel display. "FAN ERROR" appears in the front panel display. , Check that the vent on the rear of the recorder is not blocked. Then, turn off the recorder, wait until the clock appears in the front panel display, and disconnect the AC power cord. Leave the recorder off for a while, then re-connect the power cord, and press "/1 on the recorder. The disc tray does not open and you cannot remove the disc after you press Z OPEN/ CLOSE. , Turn off the recorder, Once the clock appears in the front panel display, disconnect the AC power cord. Connect it again while pressing down A on the recorder, and release the button when the disc tray opens. Then, keep [/1 on the recorder pressed for about ten seconds until "WELCOME" appears in the front panel display. "LOCKED" appears in the front panel display. , The disc tray is locked. Cancel the Child Lock (page 52). Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the recorder from malfunctioning, a fivecharacter service number (e.g., C 13 50) with a combination of a letter and four numbers appears on the front panel display. In this case, check the following table. First three Cause and/or characters of the corrective action service number C 13 The disc is dirty. , Clean the disc with a soft cloth. C 31 The disc is not inserted correctly. , Re-insert the disc correctly. E XX (xx is a number) To prevent a malfunction, the recorder has performed the selfdiagnosis function. , Contact your nearest Sony dealer or local authorized Sony service facility and give the fivecharacter service number. Example: E 61 10 86

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

86
“RECOVERY” appears in the front panel
display.
,
The recorder’s recovery function was activated
when the recorder was turned on because the
power was turned off or failed during recording.
Leave the recorder on until “RECOVERY”
disappears from the front panel display.
“FAN ERROR” appears in the front panel
display.
,
Check that the vent on the rear of the recorder is
not blocked. Then, turn off the recorder, wait
until the clock appears in the front panel display,
and disconnect the AC power cord. Leave the
recorder off for a while, then re-connect the
power cord, and press
"
/
1
on the recorder.
The disc tray does not open and you cannot
remove the disc after you press
Z
OPEN/
CLOSE.
,
Turn off the recorder, Once the clock appears in
the front panel display, disconnect the AC power
cord. Connect it again while pressing down
A
on
the recorder, and release the button when the disc
tray opens. Then, keep
[
/
1
on the recorder
pressed for about ten seconds until
“WELCOME” appears in the front panel display.
“LOCKED” appears in the front panel display.
,
The disc tray is locked. Cancel the Child Lock
(page 52).
Self-diagnosis Function
(When letters/numbers
appear in the display)
When the self-diagnosis function is activated to
prevent the recorder from malfunctioning, a five-
character service number (e.g., C 13 50) with a
combination of a letter and four numbers appears
on the front panel display. In this case, check the
following table.
First three
characters of the
service number
Cause and/or
corrective action
C 13
The disc is dirty.
,
Clean the disc with a
soft cloth.
C 31
The disc is not inserted
correctly.
,
Re-insert the disc
correctly.
E XX
(xx is a number)
To prevent a malfunction,
the recorder has
performed the self-
diagnosis function.
,
Contact your nearest
Sony dealer or local
authorized Sony
service facility and
give the five-
character service
number.
Example: E 61 10