Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 108

Setting audio/video output signals to the zone 2 audio/video signals, then press . "Main" (this receiver) is always selected. If you do not change the setting, proceed to step 7. 1 6 Press V/v to select, "ON" or "OFF," then press . 3-7 2 1 Make sure that the AMP button is lit. If it is not lit, or "GUI MODE" is not displayed in the display window of the receiver, follow the steps given in "7: Operating the receiver using the GUI (Graphical User Interface)" (page 39). 2 Press MENU repeatedly to display the GUI menu on the TV screen. 3 Press V/v repeatedly to select "Settings," then press or b. 4 Press V/v repeatedly to select "Multi Zone," then press . 5 Press V/v to select the zone to which you want to output 7 Press V/v/B/b repeatedly to select item and parameter, then press . Multi Zone menu parameters x Power Lets you turn zone operation on. • ON • OFF x Input Lets you select the source that is output to the zone. Audio and video signals are output to zone 2. x Volume Lets you adjust the volume in the zone. 108GB