Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 18

b) If you connect only one surround back speaker, connect it to the SUR BACK SPEAKERS L terminals. c) When you connect a sub woofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a sub woofer, then sound may not be output. Notes • When you connect all the speakers with a nominal impedance of 8 ohms or higher, set "Impedance" in the Speaker settings menu to "8 Ω." In other connections, set it to "4 Ω." For details, see "8: Setting the speakers" (page 42). • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. Tip To connect certain speakers to another power amplifier, use the PRE OUT jacks. The same signal is output from both the SPEAKERS terminals and the PRE OUT jacks. For example, if you want to connect just the front speakers to another amplifier, connect that amplifier to the PRE OUT FRONT L and R jacks. ZONE 2 connection You can assign the SUR BACK SPEAKER terminals F and G to the speakers of the zone 2. Set "Sur Back Assign" to "ZONE 2" in the Speaker settings menu. See "Listening to the sound in another zone (ZONE 2 operations)" (page 106) for details on connection and operation in zone 2. 18GB