Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 46

a) This receiver corrects signals by analog downmix processing only for the center speaker and sub woofer when the multi-channel input is selected. The correction is invalid for other speakers. b) The measurement result is not utilized when the multi-channel input is selected. c) • Signals with a sampling frequency of more than 96 kHz are always played back at either 44.1 kHz or 48 kHz. • The measurement result is not utilized in the following cases. -The multi-channel input is selected. -"2ch Analog Direct" is being used. -Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received. 2 Press V/v repeatedly to select "Settings," then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Auto Calibration," then press or b. 4 Press V/v repeatedly to select "Quick Setup," then press . 5 Press V/v repeatedly and to un-check the items you do not want to measure. • Speaker Distance • Speaker Level • Frequency Characteristic 1 2-7 6 Press b. 7 Press to select "Start." 1 Make sure that the AMP button is lit. If it is not lit, or "GUI MODE" is not displayed in the display window of the receiver, follow the steps given in "7: Operating the receiver using the GUI (Graphical User Interface)" (page 39). 8 The measurement starts in five seconds. 46GB