Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 118
When you select PHASE INFO, Press 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC repeatedly.
UPC - 027242715127
View all Sony STR-DA4300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Item Explanation LEVEL INFO Displays the measurement result for speaker level. EXIT Exits the setting process without saving the measurement results. 3 Press V/v repeatedly to select the parameter, then press . AUTO EQ type Explanation FULL FLAT Makes the measurement of frequency from each speaker flat. ENGINEER Sets the frequency characteristics to a set that matches that of the Sony listening room standard. FRONT REF Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. OFF Set the auto calibration type to off. Tip The size of a speaker (LARGE/SMALL) is determined by the low characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. When you select "PHASE INFO" You can check the phase of each speaker (in phase/out of phase). Press V/v repeatedly to select a speaker, then press to return to step 1 in "To confirm/save auto calibration when GUI function is turned off." Display IN Explanation The speaker is in phase. Display Explanation OUT The speaker is out of phase. The "+" and "-" terminals of the speaker may be connected the other way around. However, depending on the speakers, "OUT" appears on the display even though the speakers are connected properly. This is because of the speakers' specifications. In this case, you can continue to use the receiver. - - - No speakers are connected. Tip Depending on the position of the sub woofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. Selecting a sound field type For details on each sound field type, see "Enjoying a pre-programmed sound field" (page 60). Press 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC repeatedly. The selected sound field type appears on the display. You can also use the 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC buttons on the receiver. Listening to the sound without any adjustment (ANALOG DIRECT) Press 2CH/A.DIRECT. You can also use 2CH/A.DIRECT on the receiver. Listening to the FM/AM radio For details on the tuner function, see "Tuner Operations" (page 80). 118GB