Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 13

Getting Started Name Function S DVD/ TOP MENU, MENU Press to display the menus of the DVD player on the TV screen. Then use V/v/B/b and to perform a menu operations (page 122). NIGHT MODE Press AMP (6), then press NIGHT MODE to activate the NIGHT MODE function (page 71). INPUT MODE Press AMP (6), then press INPUT MODE to select the input mode when the same components are connected to both digital and analog jacks (page 97). T MUTING Press to turn off the sound temporarily. Press the button again to restore the sound. U MASTER VOL +/- Press to adjust the volume level of all speakers at the same time. TV VOL +/- Press TV (e;), then press TV VOL +/- to adjust the volume level of the TV. V DISC SKIP Press to skip a disc when using a multi-disc changer. W RETURN/ EXIT O Press to return to the previous menu or exit the menu while the menu or on-screen guide of the VCR, DVD player, or satellite tuner is displayed on the TV screen. X DISPLAY Press to select information displayed in the display window, TV screen of the VCR, satellite tuner, CD player, DVD player, Blu-ray Disc Player, or MD deck. Note In the SCREEN mode, press the button to display the menu on the TV screen. Name Function Y CLEAR Press to - clear a mistake when you press the incorrect numeric button. - return to continuous playback, etc. of the satellite tuner or DVD player. >10 Press to select - track numbers over 10 of the VCR, satellite tuner, CD player or MD deck. - channel numbers of the Digital CATV terminal. D.TUNING Z 2CH/ A.DIRECT Press to enter direct tuning mode (page 81, 86). Press to select sound field (page 60) or to switch the audio of the selected input to analog signal without any adjustment (page 118). wj A.F.D. Press to select sound field (page 63). wk SHIFT Press to light up the button. It changes the remote button function to activate the buttons with pink printing. wl SLEEP Press to activate the sleep timer function and the duration which the receiver turns off automatically (page 104). e; TV Press to enable the TV operation. ea RM SET UP Press to set up the remote. a)See the table on page 123 for information on the buttons that you can use to control each component. b)The tactile dot is attached to these buttons (H, PRESET+). Use as a mark of operation. Notes • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described. 13GB