Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 59

Amplifier Operations connected to the receiver. The multi-channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers when HDMI Audio is set to "AMP." x HDMI SW Level Lets you set the level of the sub woofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently. • 0 dB • AUTO Automatically sets the level to 0 dB or +10 dB depending on the frequency. • +10 dB Settings for the system (System settings menu) You can use the System settings menu to customize the settings of the receiver. Select "System" in the Settings menus. For details on adjusting the parameters, see "7: Operating the receiver using the GUI (Graphical User Interface)" (page 39). System settings menu parameters x Screen Saver Lets you activate the screen saver function for the GUI menu on the TV connected to the receiver. • ON When there has been no operation attempted for 15 minutes, the screen saver function is activated automatically. • OFF The screen saver function is disabled. x RS-232C Control Lets you use this menu for the zone 2 operation. For details, see "Option menu parameter of zone 2 operations" (page 109) in "Listening to the sound in another zone (ZONE 2 operations)." • ON • OFF 59GB