Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 48
Press, repeatedly to select, Yes, then press, the auto calibration type, then, Parameter
UPC - 027242715127
View all Sony STR-DA4300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Tip Press on the remote when "Please Press ENTER." appears on the TV screen. 3 Press B/b repeatedly to select "Yes," then press . Parameter OFF Explanation Sets the auto calibration EQ to off. 5 Press . The exit screen appears. 4 Press V/v repeatedly to select the auto calibration type, then press b. The measurement results are saved. Parameter Explanation Full Flat Makes the measurement of frequency from each speaker flat. Engineer Sets the frequency to one that matches that of the Sony listening room standard. Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Notes • After reflecting the results of a compensation for a frequency characteristic, signals with a sampling frequency of more than 96 kHz are always played back at either 44.1 kHz or 48 kHz. • The frequency response measurement result is not utilized in the following cases. - The multi-channel input is selected. - "2ch Analog Direct" is being used. - Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received. Tip The size of a speaker (LARGE/SMALL) is determined by the low characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. 48GB