Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 128

Program the sequence of the operation 1,5 2,3 3 1,3 1 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP. The RM SET UP button flashes. Tip When you press RM SET UP, use a thin wire, such as a paper clip. 2 Press the input button of the component that you want to assign one of the following operations. The selected input button lights up. 3 Press the button for the operation you want to perform to learn the function as follows. Press Operations to be programmed H, x, X, M, m, ., > Performs the operation of the button. The input Switches inputs. button for more than 1 second MACRO 1 or MACRO 2 Make a one second interval. When you want to make a longer interval, press MACRO 1 or MACRO 2 repeatedly. The input button selected in step 2 flashes twice, then lights up again. 4 Repeat steps 2 and 3. When you want to assign another command for the same component, repeat step 3. 5 Press RM SET UP to finish the programming process. Tip If the RM SET UP button flashes five times in step 1, and the macro programming process does not start, replace the batteries with new ones. To cancel programming Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings. The previous command remains valid. 128GB