Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 39

Getting Started 1 Press ?/1 while pressing RM SET UP. The RM SET UP button flashes. 2 Press 1 or 2 while the RM SET UP button is flashing. When you press 1, the command mode is set to AV SYSTEM 1. When you press 2, the command mode is set to AV SYSTEM 2. 3 Press ENTER when the RM SET UP button lights up. The RM SET UP button flashes twice, then the command mode setting process is completed. Tip When you press RM SET UP, use a thin wire, such as a paper clip. To switch the command mode of the RM-AAU018 remote 7: Operating the receiver using the GUI (Graphical User Interface) By using the GUI menu, you can make various settings and adjustments. Displaying the GUI menu on the TV screen 2 4 3 DISPLAY MUTING Press and hold DISPLAY, then press MUTING and at the same time. AMP MENU 5 4 1 Connect a TV monitor to this receiver. Refer to "3: Connecting the monitor" (page 19). 2 Turn on the receiver and the TV. 3 Press AMP to enable receiver operation. continued 39GB