Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 43
Press, repeatedly to select, Impedance, then press, or 8, depending on, the speakers you are using
UPC - 027242715127
View all Sony STR-DA4300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Getting Started 4 Press V/v repeatedly to select "Impedance," then press . - When you connect speakers with impedance of 16 ohms or higher in both "A" and "B" configuration: Set "Impedance" to "8 Ω" in the Speaker settings menu. - For other types of speakers in other configurations: Set "Impedance" to "4 Ω" in the Speaker settings menu. 5 Press V/v repeatedly to select "4 Ω" or "8 Ω" depending on the speakers you are using, then press . Notes • If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often on the back of the speaker.) • When you connect all speakers with a normal impedance of 8 ohms or higher, set "Impedance" to "8 Ω." When connecting other types of speakers, set it to "4 Ω." • When you connect front speakers to both the SPEAKERS A and B terminals, connect the speakers with a normal impedance of 8 ohms or higher. 43GB