Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 130
To cancel learning, Using a command that has been, learned, To erase the learned code
UPC - 027242715127
View all Sony STR-DA4300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
3 Press the numeric button (button 1 in the example) you want to use as the VIDEO 1 button. The input button you selected in step 2 lights up. (The RM SET UP button remains lit.) 4 Point the remote code receiver section of the remote toward the receiver/transmitter on the remote control to be learned from. While the second remote is receiving the signal, the input button selected in step 2 turns off. About 5 cm - 10 cm (2" - 4") 5 The RM SET UP button flashes twice, then the learning process is completed. When the learning process fails, the RM SET UP button flashes five times. Try to perform process again from step 2. 6 Press RM SET UP to finish the Learning function process. Tips • When the memory capacity for storing remote control codes reaches a certain limit, the RM SET UP button flashes 10 times, and then the learning process ends. • If the RM SET UP button flashes five times in step 1, and the learning process does not start, replace the batteries with new ones. To cancel learning Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings. Using a command that has been learned When selecting a learned input, press the button used to learn that function. To erase the learned code 1 Press TV while pressing RM SET UP. 2 Press the input button (VIDEO 1 in the example) for which you want to clear the setting. The input button flashes. (The RM SET UP button remains lit.) 3 Press ?/1 for more than 1 second. The input button flashes twice, repeatedly. 4 Press the input button to clear the stored setting. The RM SET UP button flashes twice, then the clearing process is completed. When the clearing process fails, the RM SET UP button flashes five times. Try to perform process again from step 2. 130GB