Toshiba 40L2200U User Guide - Page 70
Tuning to a specific channel (programmed or unprogrammed)
View all Toshiba 40L2200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
70 Using the TV's features Tuning channels using the Channel Browser Tuning to a specific channel (programmed or unprogrammed) To tune analog channels: Press the Channel Number (0-9) on the remote control. For example, to select channel 125, press 1, 2, 5, and then press the ENTER button. Tuning digital channels: Press the Channel Number (0-9) on the remote control, followed by the (Dash 100) button, and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, -, 1, and then press the ENTER button. NOTE If a digital channel is not programmed, either through the automatic channel scan or the Channel add function (see "Auto Tuning" on page 53), you will have to tune the RF channel using the Channel Numbers and the (Dash 100) button on the remote control. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the (Dash 100) button if selecting a digital channel). 3 Press the CH RTN button on the remote control. The previous channel will display. Each time you press the CH RTN button, the TV will switch back and forth between the last two channels that were tuned. NOTE If you press the CH RTN button from a non-antenna input, the TV will return to the last-viewed input. Switching between two channels using SurfLock™ The SurfLock™ feature temporarily "memorizes" one channel to the CH RTN button, so you can return to that channel quickly from any other channel by pressing the CH RTN button. To memorize a channel to the CH RTN button: 1 Tune the TV to the channel you wish to program into the CH RTN button.