Yamaha DTX-MULTI Owner's Manual - Page 15
Setting up Cubase Remote Control, Computer settings, DTX-MULTI 12 settings - 12 update
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting Up Setting up Cubase Remote Control Using a special feature, the DTX-MULTI 12 can operate as a remote controller for Cubase. For example, you can operate the Cubase transport, turn its metronome on or off, and control various other functions from the instrument's front panel, significantly increasing the efficiency of your music production workflow. ■ Computer settings When setting up Cubase remote control for the first time, complete the following steps to configure your computer correctly. 1 Download the latest version of the DTX-MULTI 12 Extension from the following web page. Save the compressed file in a convenient location and then expand it. http://dtxdrums.yamaha.com NOTE • Ensure that the latest USB MIDI driver is installed on your computer (see page 13). • Information on system requirements is also provided on the above web page. • The DTX-MULTI 12 Extension may be revised and updated without prior notice. Before installing, visit the above web page to confirm the latest related information and ensure that you have the most up-todate version. 2 Execute the expanded DTX-MULTI 12 Extension to carry out the required installation procedure. For more details, refer to the owner's manual included in the downloaded package. ■ DTX-MULTI 12 settings Whenever the Cubase Remote function is to be used, the following steps must be completed on the DTX-MULTI 12. 1 Within the UTILITY setting area, navigate to the MIDI In/Out page (UTIL6-9) and set MIDI IN/OUT to "USB". UTIL6-9≥≥≥ MIDI≥IN/OUT=USB 3 Hold down the [SHIFT] button and press the [MIDI] button. The message "Cubase Remote" will be displayed to confirm that the function has been activated. NOTE • When Cubase Remote mode has been activated, those front-panel buttons that can be used will light up. 4 To deactivate Cubase Remote mode, again hold down the [SHIFT] button and press the [MIDI] button. ■ Button Functions in Cubase Remote Mode NOTE • For more details regarding the operation of Cubase Remote mode, refer to the owner's manual included in the downloaded package. Button [SHIFT] + [MIDI] [KIT] [PTN] [SHIFT] + [PTN] [-/DEC], [+/INC] [B] [C] [D] E Operation Turns the Cubase Remote function on and off. Opens the VSTi window. Starts and stops playback. Starts recording. Increases or decreases a preset by 1. Rewinds the transport (REW). Fast forwards the transport (FF). Returns the transport to the start of the song (TOP). Turns the click track on and off. 2 Ensure that the DTX-MULTI 12 is connected to your computer in the correct manner, and then launch Cubase. For more details regarding connection, see page 13. Owner's Manual 15