Yamaha DTX-MULTI Owner's Manual - Page 79
Merge Pattern Merge Pattern Settings
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Reference KIT VOICE PATTERN Setting Area (PTN) Example of how quantizing works These recorded notes were not played exactly in time. Notes moved closer to the correct position through quantizing. PTN4-3 Clear Pattern page From the Clear Pattern page, you can delete all data from the currently selected User pattern. To do so, press the [ENTER] button with the Clear Pattern page displayed, and when asked to confirm that you wish to proceed, press the [ENTER] button once again. CAUTION • When a User pattern is cleared as described above, its data is completely erased from the instrument's pattern memory. Be sure, therefore, to always save important data on a USB memory device or the like before deleting. Exact position PTN4-2 Merge Pattern page From the Merge Pattern page, you can merge two patterns and store the result as a User pattern. To start, select a User pattern to hold the merged pattern on the Select Pattern page (PTN1). Then, navigate to the Merge Pattern page and press the [ENTER] button to open the Merge Pattern Settings page. PTN4-2 JOB Merge PTN4-2-1 Merge Pattern Settings page PTN4-3 JOB Clear PTN4-4 Clear All Patterns page From the Clear All Patterns page, you can delete data from all User patterns. To do so, press the [ENTER] button with the Clear All Patterns page displayed, and when asked to confirm that you wish to proceed, press the [ENTER] button once again. CAUTION • When User patterns are cleared as described above, their data is completely erased from the instrument's pattern memory. Be sure, therefore, to always save important data on a USB memory device or the like before deleting. PTN4-2-1≥ ≥©P004≥+≥©P005 1 2 1 Merge pattern 1 B Merge pattern 2 Use the above two parameters to specify the patterns that are to be merged as one. Settings P004 to P128 or U001 to U050 NOTE • If the User pattern selected before opening the Merge Pattern page already contains data, it will be overwritten with the merged pattern. • The tempo and time signature of Merge pattern 1 are set as the tempo and time signature of the merged pattern. If Merge pattern 1 is empty, however, the tempo and time signature of Merge pattern 2 are used. • The channel-specific MIDI settings of Merge pattern 1 are set as those of the merged pattern. In the case, however, of MIDI channels for which Merge pattern 1 contains no settings, any applicable settings from Merge pattern 2 will be applied. • Generally speaking, only patterns with similar tempos, time signatures, and MIDI voice settings should be merged. • Demo patterns cannot be selected for merging. PTN4-4 JOB> ≥≥≥Clear≥All PTN4-5 Copy Pattern page From the Copy Pattern page, you can copy a pattern to the currently selected User pattern. With the Copy Pattern page displayed, press the [ENTER] button to open the Copy Pattern Setting page. PTN4-5 JOB Copy MIDI WAVE PATTERN UTILITY TRIGGER Owner's Manual 79