Yamaha DTX-MULTI Owner's Manual - Page 56
Select Voice, VCE1≥-¡£Ω¡-≥≥≥≥ç, Sn001:OakCustom, ©U001:EmptyPtn - 12 data list
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
VOICE Setting Area (VCE) VCE1 Select Voice VCE1 Sn001:OakCustom On the Select Voice page (VCE1), you can select the preset voice, wave, or pattern that will be played when the specified pad is struck. Alternatively, you can select a MIDI note to be played when a pad is struck, and then assign a voice to that MIDI note (see page 34). The applicable parameter-setting pages, parameters, and settings in the VOICE area will depend on whether a pad number or MIDI note number is specified. NOTE • Certain parameters have no effect when a pattern or a MIDI note number has been assigned to the pad in question. Their settings will be displayed as "---" and modification will not be possible. Assigning a voice to a pad If the voice is not a pattern (i.e., eP or eU) 1 2 VCE1 Sn001:OakCustom 3 4 If the voice is a pattern (i.e., eP or eU) 1 5 VCE1 U001:EmptyPtn 3 4 Assigning a voice to a MIDI note number 1 VCE1≥≥C#-1/≥13 Sn001:OakCustom 3 4 1 Pad number Use this parameter to select the number of the pad or MIDI note to be set. You can also strike a pad to select it. Settings 01 to 12, 13, 13R1, 13R2, 14 to 17, FTSW (foot switch), HHCL (hi-hat close), HHSP (hihat splash), C#-1, or D-1 to A#5 NOTE • Pad 13 supports three different zones, and therefore, is assigned three different pad numbers - namely, 13 for the head, 13R1 for rim 1, and 13R2 for rim 2. • Pads 10 to 12 cannot be selected if "disable" has been set on the Pad 10-12 Switch page (UTIL4-3). B Layer number Use this parameter to select the layer to be set. Each pad can contain up to four layers, each of which can be used to play a preset voice or wave. For details, see page 32. Settings A, B, C, or D NOTE • The maximum number of layers that can be set for any pad is 4. To add a layer, change its setting on the MIDI Note page (MIDI1-2) from "off" to a MIDI note number. C Voice category Use this parameter to specify the category of voice to be assigned as a preset voice, preset pattern (eP), user pattern (eU), or wave. Settings Kk, Sn, Tm, Cv, HH, EP, Cu, Br, In, Jp, Af, Or, E1, E2, E3, Ml, GM, WV, eP, or eU NOTE • Patterns cannot be assigned to MIDI note numbers. D Voice number: Voice name Use these parameters to select a preset voice, pattern, or wave from the category indicated by 3. Settings Refer to the separate Data List booklet. E Pattern playback mode If a pattern has been assigned to the pad, use this parameter to specify how it will be played Start/stop mode: The pattern will start to play from the beginning when you strike the pad, and it will stop the next time you strike it Chase mode: One successive measure will be played each time you strike the pad Cut-off mode: Only one pattern set to this mode can play at any time. Whenever a cut-off mode pattern is triggered, any pattern already playing in this mode will be automatically stopped. Settings > , >~ , ~> NOTE • The maximum number of patterns that can play simultaneously is four. • Demo patterns cannot be assigned to pads. 56 Owner's Manual