Yamaha DTX-MULTI Owner's Manual - Page 35
Using the DTX-MULTI 12 as a MIDI Control, VCE1≥≥≥≥E≥1/≥40, Cy013:Thin16Eg - 12 sequencer
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reference Internal Design 7 Press the [VOICE] button, navigate to the Select Voice page (VCE1), and in the same way as described above, set "Cy013:Thin16Eg" as the voice to be played for MIDI notes with the MIDI note number 40 (E1). VCE1≥≥≥≥E≥1/≥40 Cy013:Thin16Eg With your DTX-MULTI 12 configured in this way, whenever you strike built-in Pad 1, two MIDI notes with the MIDI note numbers 38 (D1) and 40 (E1) will be simultaneously sent to the internal tone generator, and the tone generator will respond by playing the preset voices Sn001 (OakCustom) and Cy013 (Thin16Eg) together. The following diagram illustrates exactly what happens inside the instrument when Pad 1 has been setup to play two voices simultaneously as described above. Built-in Pad 1 is struck. Two MIDI notes ("D1/38" and "E1/40") are simultaneously sent to the internal tone generator. MIDI note numbers on a standard keyboard. C0 0 24 D1 E1 38 40 The voices assigned to each of these MIDI notes are played. Sn001: OakCustom Cy013: Thin16Eg snare sound cymbal sound C7 108 127 KIT VOICE MIDI WAVE PATTERN UTILITY TRIGGER ■ Using the DTX-MULTI 12 as a MIDI Controller Instead of MIDI Note messages, the DTX-MULTI 12 can be setup to send MIDI Program Change messages, MIDI Control Change messages, and the like to MIDI devices connected via the MIDI OUT connector or USB TO HOST port whenever pads are struck or external controllers are operated. Using this functionality, you can easily configure pads to, for example, start and stop playback on a MIDI sequencer or to change presets on a MIDI instrument. In contrast to the type of control introduced in the Pads & Trigger Signals section (see page 28), which makes it possible to play the DTX-MULTI 12 with trigger signals sent from a controller or foot switch connected via the FOOT SW jack, the MIDI control function allows the instrument's built-in pads and external pads to operate as versatile MIDI controllers. In addition to selecting frequently-used kits and patterns or setting the tempo for click-track or pattern playback, this powerful function also allows you to assign MIDI Control Change numbers (01 to 95) and values to pads in order to facilitate a wide range of unique modes of use. Owner's Manual 35