Yamaha DTX-MULTI Owner's Manual - Page 67
Other MIDI Settings, Transmit Volume Pan Program Change
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Reference KIT VOICE MIDI Setting Area (MIDI) MIDI3 OTHER Other MIDI Settings MIDI3 OTHER In the OTHER section, you can set various MIDI messages to be sent whenever the current kit is selected. With the OTHER page (MIDI3) displayed, press the [ENTER] button to access its eight parameter-setting pages (MIDI3-1 through MIDI3-8). You can use the [B]/[C] buttons to navigate between these pages. MIDI3-1 Transmit page MIDI3-1 Ch≥1 1 ≥≥Transmit=all 2 1 MIDI channel (Ch) Use this parameter to select the MIDI channel (1 to 16) to be set. Settings 1 to 16 B Transmit Use this parameter to indicate which MIDI messages are to be sent whenever the current kit is selected. • off No MIDI messages will be sent. • all All applicable MIDI messages will be sent. (See the following parameter-setting page descriptions for more details.) • PC Only program change messages and bank-select MSB/LSB messages will be sent. Settings off, all, or PC MIDI3-2 Volume page MIDI3-2 Ch≥1 1 ≥≥≥Volume=100 2 1 MIDI channel (Ch) Settings 1 to 16 B Volume Use this parameter to set a volume value to be sent whenever the current kit is selected. Settings 0 to 127 NOTE • If "off" or "PC" has been selected on the Transmit page (MIDI3-1), this setting will be displayed as "---" and modification will not be possible. MIDI3-3 Pan page MIDI3-3 Ch≥1 1 ≥≥≥≥Pan=≥C 2 1 MIDI channel (Ch) Settings 1 to 16 B Pan Use this parameter to set the pan value to be sent whenever the current kit is selected. Settings L63 to C to R63 NOTE • If "off" or "PC" has been selected on the Transmit page (MIDI3-1), this setting will be displayed as "---" and modification will not be possible. MIDI3-4 Program Change page MIDI3-4 Ch≥1 1 M000/L000/PC001 2 3 4 1 MIDI channel (Ch) Settings 1 to 16 B Bank select MSB (M) Use this parameter to set a bank-select MSB value to be sent whenever the current kit is selected. Settings 000 to 127 C Bank select LSB (L) Use this parameter to set a bank-select LSB value to be sent whenever the current kit is selected. Settings 000 to 127 D Program change (PC) Use this parameter to set a program-change number to be sent whenever the current kit is selected. Settings 001 to 128 NOTE • If "off" has been selected on the Transmit page (MIDI3-1), these settings will be displayed as "---" and modification will not be possible. MIDI WAVE PATTERN UTILITY TRIGGER Owner's Manual 67