Yamaha DTX-MULTI Owner's Manual - Page 22
VCE≥Store≥to, U001:User≥Kit - 12 drums
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Making Your Own Patterns 5 Press the [PTN] button to start recording. The DTX-MULTI 12 will count you in over two measures. Then, play the pattern you want to record in time with the click track. Measure currently being recorded REC≥Meas=≥001 Now≥Recording... CAUTION • Turning off the DTX-MULTI 12 while recording can result in data for all User patterns being lost and must, therefore, be avoided. 6 Recording will end automatically after the number of measures set as the pattern length in Step 4 above. The message "Please keep power on..." will be displayed for a short period of time as data is being stored. ≥Please≥keep power≥on... CAUTION • Turning off the DTX-MULTI 12 while the message "Please keep power on..." is being displayed can result in all User-pattern data being lost and must, therefore, be avoided. NOTE • Recording can be stopped at any time by pressing the [PTN] button. All performance data recorded up to that point will be stored. • If looped playback was selected in Step 4 above, recording can be ended by pressing the [PTN] button. 7 When the Pad Assign page is displayed, strike Pad 6 to display pad number º§, and then press the [ENTER] button. Alternatively, you can use the [-/DEC] and [+/INC] buttons to select º§ on this page. REC ≥PadAssign=º§ Pad number NOTE • If you set PadAssign to "off", the recorded pattern will not be assigned to any pad. • Although you can freely assign the recorded pattern to a pad at any time, it is best to use a pad from the drum kit selected in Step 1 above. If you assign it to a pad from another kit, the pattern may not play as recorded. 8 Press the [KIT] button to access the KIT setting area. KIT1 P001:PercsMaster 9 Press the [STORE] button and store the current kit and its new pattern assignment as a User kit. As shown here, select an empty User kit using the [-/ DEC] and [+/INC] buttons, and then press the [ENTER] button. VCE≥Store≥to U001:User≥Kit User kit number User kit name 10 When asked to confirm that you want to store the kit, press the [ENTER] button to proceed. ≥≥≥KIT≥Store ≥Are≥you≥sure?≥≥ CAUTION • The message "Please keep power on..." will be displayed while data is being stored. It is very important that the DTX-MULTI 12 is not turned off until this message disappears. If the instrument were to be turned off at this time, data for all User kits could be permanently lost. ≥≥Please≥keep ≥≥power≥on... 11 With the stored drum kit selected, strike Pad 6 to hear the pattern that you assigned. NOTE • Up to 50 User patterns can be recorded on your DTX-MULTI 12. If an attempt is made to record more than this number, the message "Seq data is not empty" will be displayed and the recording process will end. In such a case, delete unneeded User patterns (see page 79) and begin recording again. 22 Owner's Manual