Yamaha DTX-MULTI Owner's Manual - Page 68

Variation Send Level Chorus Send Level CC Number & Value MIDI3-5≥Ch≥1

Get Yamaha DTX-MULTI PDF manuals and user guides View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

MIDI Setting Area (MIDI) MIDI3-5 Variation Send Level page MIDI3-6 Chorus Send Level page MIDI3-7 Reverb Send Level page On the Variation Send Level, Chorus Send Level, and Reverb Send Level pages, you can adjust the send level to be set for each of the corresponding effect units when the current kit is selected. NOTE • If "off" or "PC" has been selected on the Transmit page (MIDI3-1), theses settings will be displayed as "---" and modification will not be possible. Parameter 2 from each of the pages is used to adjust the corresponding send level. Parameter 1 is identical on all three pages. [Setting example using the Variation Send Level page (MIDI3-5)] MIDI3-5 Ch≥1 1 Var=≥≥0(Dry=127) 2 1 MIDI channel (Ch) Settings 1 to 16 [MIDI3-5 Variation Send Level page] B Variation send level (Var) Use this parameter to set the variation-effect send level to be sent whenever the current kit is selected. Settings 0 to 127 NOTE • If the MIDI channel 1 is set to 10, this setting will be displayed as "---" and modification will not be possible. [MIDI3-6 Chorus Send Level page] 2 Chorus send level (ChoSend) Use this parameter to set the chorus send level to be sent whenever the current kit is selected. Settings 0 to 127 [MIDI3-7 Reverb Send Level page] 2 Reverb send level (RevSend) Use this parameter to set the reverb send level to be sent whenever the current kit is selected. Settings 0 to 127 MIDI3-8 CC Number & Value page MIDI3-8 Ch≥1 1 CCNo=off/Val=≥≥0 2 3 1 MIDI channel (Ch) Settings 1 to 16 B Control change number (CCNo) Use this parameter to set the type (or number) of MIDI Control Change message to be sent whenever the current kit is selected. No control-change messages are sent when "off" is set. Settings off or 1 to 95 C Control change value (Val) Use this parameter to set a value for the MIDI Control Change messages to be sent whenever the current kit is selected. Settings 0 to 127 NOTE • If "off" or "PC" has been selected on the Transmit page (MIDI3-1), these settings will be displayed as "---" and modification will not be possible. • If the type of MIDI Control Change message set on this page (MIDI3-8) matches one of the control-change message types set on the following pages, this page's setting will have priority: Volume (MIDI3-2), Pan (MIDI3-3), Variation Send Level (MIDI3-5), Chorus Send Level (MIDI36), or Reverb Send Level (MIDI3-7). 68 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
68
Owner’s Manual
MIDI Setting Area (MIDI)
On the Variation Send Level, Chorus Send Level, and Reverb
Send Level pages, you can adjust the send level to be set for each
of the corresponding effect units when the current kit is selected.
•
If “off” or “PC” has been selected on the Transmit page (MIDI3-1), theses
settings will be displayed as “---” and modification will not be possible.
Parameter
2
from each of the pages is used to adjust the corre-
sponding send level. Parameter
1
is identical on all three pages.
[Setting example using the Variation Send Level
page (MIDI3-5)]
1
MIDI channel (Ch)
[MIDI3-5 Variation Send Level page]
B
Variation send level (Var)
Use this parameter to set the variation-effect send level to be
sent whenever the current kit is selected.
•
If the MIDI channel
1
is set to 10, this setting will be displayed as “---”
and modification will not be possible.
[MIDI3-6 Chorus Send Level page]
2
Chorus send level (ChoSend)
Use this parameter to set the chorus send level to be sent
whenever the current kit is selected.
[MIDI3-7 Reverb Send Level page]
2
Reverb send level (RevSend)
Use this parameter to set the reverb send level to be sent
whenever the current kit is selected.
1
MIDI channel (Ch)
B
Control change number (CCNo)
Use this parameter to set the type (or number) of MIDI Con-
trol Change message to be sent whenever the current kit is
selected. No control-change messages are sent when “off” is
set.
C
Control change value (Val)
Use this parameter to set a value for the MIDI Control Change
messages to be sent whenever the current kit is selected.
•
If “off” or “PC” has been selected on the Transmit page (MIDI3-1),
these settings will be displayed as “---” and modification will not be
possible.
•
If the type of MIDI Control Change message set on this page (MIDI3-8)
matches one of the control-change message types set on the following
pages, this page’s setting will have priority: Volume (MIDI3-2), Pan
(MIDI3-3), Variation Send Level (MIDI3-5), Chorus Send Level (MIDI3-
6), or Reverb Send Level (MIDI3-7).
MIDI3-5
Variation Send Level page
MIDI3-6
Chorus Send Level page
MIDI3-7
Reverb Send Level page
Settings
1 to 16
Settings
0 to 127
Settings
0 to 127
Settings
0 to 127
NOTE
MIDI3-5≥≥≥≥≥Ch≥1
Var=≥≥0(Dry=127)
1
2
NOTE
MIDI3-8
CC Number & Value page
Settings
1 to 16
Settings
off or 1 to 95
Settings
0 to 127
MIDI3-8≥≥≥≥≥Ch≥1
CCNo=off/Val=≥≥0
1
3
2
NOTE