Yamaha DTX-MULTI Owner's Manual - Page 85

Reference KIT VOICE UTILITY Setting Area (UTIL) UTIL2-5 Click-track MIDI page UTIL2-5 ≥≥≥Click≥MIDI From the Click-track MIDI page (UTIL2-5), you can set a range of MIDI parameters related to the click track. With this page displayed, press the [ENTER] button to access a further four parameter-setting pages (UTIL2-5-1 to UTIL2-5-4). You can use the [B]/[C] buttons to navigate between these pages. UTIL2-5-1 Click-track MIDI In page UTIL2-5-1 ≥≥MIDI≥IN=off 1 1 MIDI IN Use this parameter to specify whether or not click-track sounds are to be produced based on MIDI Note On messages received via the MIDI IN connector. When set to "on", the DTX-MULTI 12 operates as follows: • A click-track accent sound will be produced upon the receipt of a MIDI note with the note number set on the Accent Note Number page (UTIL2-5-3). • A click-track quarter note sound will be produced upon the receipt of a MIDI note with the note number set on the Quarter-Note Note Number page (UTIL2-5-4). Settings off or on UTIL2-5-3 Accent Note Number page UTIL2-5-3 NoteA...=C#-1/≥13 1 1 Accent note number (NoteAcc) Use this parameter to assign a MIDI note number to clicktrack accent sounds. Settings off or C#-2 to F#8 • If "on" is selected on the Click-track MIDI In page (UTIL2-5-1), a click-track accent sound will be produced each time a MIDI note with the note number set here is received. NOTE • If "off" is selected on this page (UTIL2-5-3), no click-track accent sounds will be produced in response to received MIDI notes. • If the same value is set on this page (UTIL2-5-3) and on the Quarter- Note Note Number page (UTIL2-5-4), the same sound will be produced for all beat timings. • If "on" is selected on the Click-Track MIDI Out page (UTIL2-5-2), a MIDI Note On message with the note number set here will be produced for each click-track accent sound. NOTE • If "off" is selected both on this page (UTIL2-5-3) and on the Quarter- Note Note Number page (UTIL2-5-4), no MIDI Note On messages will be output for click-track sounds. If, however, "off" is selected on this page (UTIL2-5-3) but a setting other than "off" is selected on the Quarter-Note Note Number page (UTIL2-5-4), MIDI Note On messages with the corresponding note number will be output for all click-track sounds. UTIL2-5-2 Click-Track MIDI Out page UTIL2-5-4 Quarter-Note Note Number page UTIL2-5-2 ≥≥MIDI≥OUT=off 1 UTIL2-5-4 ≥Noteƒ=C#-1/≥13 1 1 MIDI OUT Use this parameter to turn the output of click-track MIDI events (i.e., MIDI Note On messages) on and off. When set to "on", the DTX-MULTI 12 operates as follows: • A MIDI note with the note number set on the Accent Note Number page (UTIL2-5-3) will be produced for each click- track accent sound. • A MIDI note with the note number set on the Quarter-Note Note Number page (UTIL2-5-4) will be produced for each click-track quarter note sound. Settings off or on NOTE • Regardless of this parameter's setting, no MIDI Note On messages can be produced for click-track sounds other than accents and quarter notes. 1 Quarter-note note number (Noteq) Use this parameter to assign a MIDI note number to clicktrack quarter note sounds. Settings off or C#-2 to F#8 • If "on" is selected on the Click-track MIDI In page (UTIL2-5-1), a click-track quarter-note sound will be produced each time a MIDI note with the note number set here is received. NOTE • If "off" is selected on this page (UTIL2-5-4), no click-track quarter-note sounds will be produced in response to received MIDI notes. • If "on" is selected on the Click-Track MIDI Out page (UTIL2-5-2), a MIDI Note On message with the note number set here will be produced for each click-track quarternote sound. NOTE • If "off" is selected on this page (UTIL2-5-4), no MIDI Note On mes- sages will be produced for click-track quarter-note sounds. MIDI WAVE PATTERN UTILITY TRIGGER Owner's Manual 85