Yamaha DTX-MULTI Owner's Manual - Page 90
Instrument MIDI Setup, Channel-10 Receive Program Change Receive Channel-10 Program Change - 12 multi pad
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
UTILITY Setting Area (UTIL) UTIL6 MIDI Instrument MIDI Setup UTIL6-3 Channel-10 Program Change Receive page UTIL6 MIDI In the MIDI section, you can set MIDI parameters affecting the entire DTX-MULTI 12 system. With the MIDI page (UTIL6) displayed, press the [ENTER] button to access its twelve parametersetting pages (UTIL6-1 to UTIL6-12). You can use the [B]/[C] buttons to navigate between these pages. UTIL6-1 Channel-10 Receive page UTIL6-1≥≥≥ ≥≥Rcv10ch=on 1 1 Channel-10 receive (Rcv10ch) Use this parameter to enable ("on") or disable ("off") the receipt of MIDI messages sent by external devices on Channel 10. If set to "off", the internal tone generator will play voices on Channel 10 in response only to input from the DTX-MULTI 12's pads and from pads connected via the PAD jacks. Settings off or on UTIL6-2 Program Change Receive page UTIL6-3≥≥≥ ≥RcvPC10ch=on 1 1 Channel-10 program change receive (RcvPC10ch) Use this parameter to enable ("on") or disable ("off") the receipt of MIDI Program Change messages sent on MIDI channel 10. Select "on" if you want kits to change in line with pattern settings or in response to signals from external MIDI devices. Note that this setting is effective only when "on" is also selected on the Program Change Receive page (UTIL62). Settings off or on UTIL6-4 Polyphonic Aftertouch Status page UTIL6-4≥≥≥ ≥PolyAfter=on 1 1 Polyphonic aftertouch status (PolyAfter) Use this parameter to enable ("on") or disable ("off") the exchange of polyphonic aftertouch messages with external MIDI devices. Settings off or on UTIL6-2≥≥≥ ≥≥≥RcvPC=on 1 1 Program change receive (RcvPC) Use this parameter to enable ("on") or disable ("off") the receipt of MIDI Program Change messages. If set to "off" and a new drum kit is selected, voices will be changed only based on settings made for that kit's preset voices. If you want voices on all MIDI channels to change in line with pattern settings or in response to signals from external MIDI devices, this parameter should be set to "on". Settings off or on UTIL6-5 Local Control page UTIL6-5≥≥≥ ≥LocalCtrl=on 1 1 Local control (LocalCtrl) Use this parameter to enable ("on") or disable ("off") playing of the internal tone generator using DTX-MULTI 12 pads and patterns. Normally, this is set to "on", meaning that the tone generator is locally controlled. If set to "off," the pads and external controllers are essentially disconnected from the internal tone generator - in other words, no sound is produced by the DTX-MULTI 12 when you strike them. NOTE • Even if local control is disabled (i.e., set to "off") on this page, the DTX- MULTI 12's internal tone generator can produce sound in response to MIDI messages received via the MIDI IN connector and the USB TO HOST port; furthermore, MIDI messages produced by pads, patterns, and external controllers will be output via the MIDI OUT connector. Settings off or on 90 Owner's Manual