Yamaha DTX-MULTI Owner's Manual - Page 61

MIDI Setting Area (MIDI) Reference KIT VOICE MIDI WAVE This section describes the MIDI setting area, which can be accessed using the [MIDI] button. In this area, you can set MIDI-related parameters on an individual-kit basis. In addition, layer settings for each pad (i.e., the number of layers and the way in which they play) are also configured within the MIDI setting area. For more information on the functions setup using this setting area, see page 34. CAUTION • Be sure to store any settings that you have edited before turning off the instrument or selecting a new kit. (See page 45.) Structure of MIDI Setting Area The MIDI setting area is subdivided into three different sections (MIDI1 to MIDI3). Use the [B]/[C] buttons to navigate between these sections. If a section contains parameter-setting pages, the [ENTER] button will light up. Press the [ENTER] button to access these pages. You can press the [EXIT] button to move back towards the top of the setting area. MIDI parameters set within this area are stored on an individual-kit basis; therefore, you should always select the drum kit you want to configure within the KIT setting area before entering the MIDI setting area. Parameters within the MIDI MESSAGE section (MIDI1) affect individual pads, which can be selected on-screen or by striking them. Meanwhile, parameters within the TG/MIDI SWITCH section (MIDI2) and the OTHER section (MIDI3) affect individual MIDI channels, which can be selected on-screen. Sections MIDI1≥-º¡MessageType=note MIDI2 TG/MIDI≥SWITCH Parameter-setting pages The parameter-setting pages that make up the MIDI MESSAGE section will depend on the type of MIDI message selected on the Select Message Type page (MIDI1). • Pages when MessageType is set to "note": MIDI1-1 Playing Mode page Page 62 MIDI1-2 MIDI Note page Page 63 MIDI1-3 MIDI Channel page Page 63 MIDI1-4 Gate Time page Page 64 MIDI1-5 Receive Key-Off page Page 64 MIDI1-6 Velocity Limits page Page 64 MIDI1-7 Trigger Velocity page Page 64 MIDI1-8 Trigger Polyphony page Page 65 MIDI1-9 Trigger Alternate Group page Page 65 • Pages when MessageType is set to "CC": MIDI1-1 Control Change Number & Value page Page 65 MIDI1-2 MIDI Channel page Page 65 • Pages when MessageType is set to "PC": MIDI1-1 Program Change page Page 66 MIDI1-2 MIDI Channel page Page 66 • No pages are accessible when MessageType is set to "strt", "cont", or "stop". MIDI2-1 Tone Generator Switch page Page 66 MIDI2-2 External MIDI Switch page Page 66 MIDI3 OTHER MIDI3-1 Transmit page Page 67 MIDI3-2 Volume page Page 67 MIDI3-3 Pan page Page 67 MIDI3-4 Program Change page Page 67 MIDI3-5 Variation Send Level page Page 68 MIDI3-6 Chorus Send Level page Page 68 MIDI3-7 Reverb Send Level page Page 68 MIDI3-8 CC Number & Value page Page 68 Owner's Manual 61 PATTERN UTILITY TRIGGER