Yamaha DTX-MULTI Owner's Manual - Page 54
Exchange Kits Initialize Pad Exchange Kits Settings
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
KIT Setting Area (KIT) KIT8-3 Exchange Kits page From the Exchange Kits page, you can swap settings for a pair of User kits. With this page displayed, press the [ENTER] button to open the Exchange Kits Settings page. KIT8-3 JOB> ≥≥Exchange≥Kit KIT8-3-1 Exchange Kits Settings page KIT8-3-1≥ ≥≥U001≥åß≥U002 1 2 1 Exchange kit 1 B Exchange kit 2 Use these parameters to select the two drum kits whose settings are to be swapped. Settings U001 to U200 NOTE • Only those settings already stored will be swapped. In addition, if drum kits are swapped without first storing any modified settings, the swapped settings will be overwritten with the modified settings when the drum kit is subsequently stored. KIT8-5 Initialize Kit page From the Initialize Kit page, you can initialize the drum kit currently being edited. With the Initialize Kit page displayed, press the [ENTER] button, and when asked to confirm that you wish to proceed, press the [ENTER] button once again. KIT8-5 JOB> ≥Initialize≥Kit CAUTION • When a kit is initialized, all of its parameters will be returned to their default settings. If you would like to save a copy of the kit before initialization, perform a Store operation as described on page 45 to store the currently selected drum kit as a different User kit. KIT8-4 Initialize Pad page From the Initialize Pad page, you can initialize individual pads from the currently selected drum kit. With this page displayed, press the [ENTER] button to open the Initialize Pad Setting page. KIT8-4 JOB> ≥Initialize≥Pad KIT8-4-1 Initialize Pad Setting page KIT8-4-1≥ ≥≥InitPad=¡£Ω¡ 1 1 Pad number Use this parameter to select the pad to be initialized. Settings 01 to 12, 13, 13R1, 13R2, 14 to 17, FTSW, HHCL, or HHSP Once you have selected a pad, press the [ENTER] button, and when asked to confirm that you wish to proceed, press the [ENTER] button once again. 54 Owner's Manual