Yamaha DTX-MULTI Owner's Manual - Page 53
Kit Management, Copy Pad Exchange Pads
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Reference KIT VOICE KIT Setting Area (KIT) KIT8 JOB Kit Management KIT8 JOB In the JOB section, you can perform a range of management tasks such as copying, swapping, and initializing of kits and pads. With the JOB page (KIT8) displayed, press the [ENTER] button to access its five parameter-setting pages (KIT8-1 to KIT8-5). You can use the [B]/[C] buttons to navigate between these pages. Operations on the JOB section's parameter-setting pages are performed as follows. 1 Make the required setting(s) and press the [ENTER] button. 2 You will be asked to confirm that you wish to proceed. 3 To do so, press the [ENTER] button. Alternatively, you can press the [EXIT] button to cancel the process. NOTE • Use the [STORE] button to open the Store Kit page and save the drum kit in the DTX-MULTI 12's internal memory (see page 45). (This is not necessary when swapping kits on the Exchange Kit page (KIT8-3).) KIT8-1 Copy Pad page From the Copy Pad page, you can copy settings from one pad to another in the currently selected drum kit. With this page displayed, press the [ENTER] button to open the Copy Pad Settings page. KIT8-1 JOB Copy≥Pad KIT8-1-1 Copy Pad Settings page KIT8-1-1≥≥ ≥≥Exchange≥Pad KIT8-2-1 Exchange Pads Settings page KIT8-2-1≥