Yamaha DTX-MULTI Owner's Manual - Page 49
Chorus Effect Setup, Variation Return Chorus Type
View all Yamaha DTX-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Reference KIT VOICE KIT Setting Area (KIT) KIT4-2 Variation Return page KIT4-2 VAR> ≥VarReturn=≥64 1 1 Variation return (VarReturn) Use this parameter to set the level of the return signal from the variation effect. Settings 0 to 127 KIT4-3 Variation Pan page KIT4-3 VAR> ≥≥≥VarPan=≥C 1 1 Variation pan (VarPan) Use this parameter to set the stereo panning of the variation effect's return signal. Settings L63 to C to R63 KIT4-4 Variation to Reverb page KIT4-4 VAR> ≥≥VarToRev=≥≥0 1 1 Variation to reverb (VarToRev) Use this parameter to set the degree to which the output from the variation effect is sent to the reverb effect. Settings 0 to 127 KIT4-5 Variation to Chorus page KIT4-5 VAR> ≥≥VarToCho=≥≥0 1 1 Variation to chorus (VarToCho) Use this parameter to set the degree to which the output from the variation effect is sent to the chorus effect. Settings 0 to 127 KIT5 CHORUS Chorus Effect Setup KIT5 CHORUS In the CHORUS section, you can select a chorus effect and configure it in a range of different ways. Chorus effects are applied to all voices (on all MIDI channels). With the CHORUS page (KIT5) displayed, press the [ENTER] button to access its four parameter-setting pages (KIT5-1 to KIT5-4). You can use the [B]/[C] buttons to navigate between these pages. KIT5-1 Chorus Type page KIT5-1≥≥ChoType= G≥Chorus 1 1 Chorus type Use this parameter to select a chorus-effect type. Settings Refer to the separate Data List booklet. With a chorus type selected, you can press the [ENTER] button on the Chorus Type page (KIT5-1) to access a range of setting pages allowing each of its parameters to be set. (The number of parameter-setting pages depends on the type selected.) Use the [B]/[C] buttons to navigate between these pages. KIT5-1-1 Parameter setting page (example) KIT5-1-1≥≥≥ LFOSpeed=0.000Hz 1 1 Effect parameter Each parameter setting page contains a different parameter for the selected chorus type. Settings Refer to the separate Data List booklet. KIT5-2 Chorus Return page KIT5-2 CHO> ≥ChoReturn=≥64 1 1 Chorus return (ChoReturn) Use this parameter to set the level of the return signal from the chorus effect. Settings 0 to 127 MIDI WAVE PATTERN UTILITY TRIGGER Owner's Manual 49